craigslist | tools in north chicagoland

ENGINE ANALYZER (WAUCONDA) $15

2009-11-12T09:56:39-06:00

SEARS ENGINE ANALYZER IN VERY GOOD CONDITION

$15.00 0B0

CONTACT WAYNE OR JOHN

224-440-2612

MILWAUKEE GRINDER/SANDER (WAUCONDA) $75

2009-11-12T09:48:38-06:00

HEAVY DUTY MILWAUKEE GRINDER/SANDER

LOOKS LIKE HELL BUT IN EXCELLANT WORKING CONDITION

75.00 OBO

CONTACT WAYNE OR JOHN

224-440-2612

10in vertical bandsaw Craftsman New (north chicagoland) $99

2009-11-12T08:30:33-06:00

still in box

Call 1-773-329-1296

4ton arbor press dayton New (chicago) $175

2009-11-12T08:30:08-06:00

compound and straight

Call 1-773-329-1296

+++BLACK & DECKER MACHO III ROTARY HAMMER +++ (Glenview Northbrook 294 and Willow Rd.) $200

2009-11-12T07:35:57-06:00

If you are reading this: it is still available.
Black & Decker Macho III Rotary Hammer.
Can be used for drilling holes in concrete or chipping concrete.
Uses spline bits and corebits up to 3"
In Excellent condition in the original factory case.
$200 CASH, POSTAL MONEY ORDER, OR PAYPAL ACCEPTED.

Keyword: phone nextel sprint verizon att boost where you at new used telephone cell wire cable cord tradesman carpenter electrician electrical pipefitter plumber locksmith car van auto atv winch harley motorcycle talk ptt sim card simcard toy antique gps construction concrete drill chip chop tool

### GREENLEE HYDRAULIC PUMP 767 AND 1/2" TO 2" CUTTING DIES#### $475

2009-11-12T07:33:08-06:00

If you are reading this, the item is still available.
Please check my other listing for Greenlee Hydraulic Dies Sizes 2-1/" 3" 3-1/2" 4".
Greenlee 767 Hydraulic Pump and metal punching dies.
In very good working condition.
In original factory metal case.
Comes with the following dies:
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2) sleeves
Comes with everything you see in the picture.
$475.00 CASH, POSTAL MONEY ORDER, OR PAYPAL ACCEPTED.

Keyword: phone nextel sprint verizon att boost where you at new used telephone cell wire cable cord tradesman carpenter electrician electrical pipefitter plumber locksmith car van auto atv winch harley motorcycle talk ptt sim card simcard toy antique gps construction concrete drill chip chop tool

@@@ GREENLEE METAL CUTTING DIES FOR HYDRAULIC PUMP 2-1/2" TO 4" (Glenview Northbrook 294 and Willow rd.) $300

2009-11-12T07:31:42-06:00

If you are reading this, the item is still available.

See my other listing for Greenlee 767 Hydraulic Pump and Die Set 1/2" to 2"
Greenlee metal cutting dies in the following sizes:
2-1/2"
3"
3-1/2"
4"
In very good working condition.
In original factory metal case.
Comes with everything you see in the picture.
$300 CASH, POSTAL MONEY ORDER, OR PAYPAL ACCEPTED.

Keyword: phone nextel sprint verizon att boost where you at new used telephone cell wire cable cord tradesman carpenter electrician electrical pipefitter plumber locksmith car van auto atv winch harley motorcycle talk ptt sim card simcard toy antique gps construction concrete drill chip chop tool junction box boxes pullbox

CRAFTSMAN SHOP VAC VACUUM (Glenview Northbrook) $75

2009-11-12T07:25:25-06:00

Craftsman Shop Vac. Comes with everything you see in the pictures.
$75.00 Cash Postal Money Order or Paypal accepted.
Works Great!!!

phone nextel sprint verizon att boost where you at new used telephone cell wire cable cord tradesman carpenter electrician electrical pipefitter plumber locksmith car van auto atv winch harley motorcycle talk ptt sim card simcard toy antique gps construction concrete drill chip chop tool

%%% Bosch PS20 10.8 Volt Cordless Driver Drill Kit %%% (Glenview or Northbrook or Wheeling) $95

2009-11-12T07:14:51-06:00

Very slightly used :
Bosch PS20 Litheon Cordless Drill Driver
Comes with everything in the pictures:
1) Drill
1) Phillips Bit
1) Flat Blade Bit
2) Batteries
1) Charger
1) Zippered Carrying Case
All Owners Manuals and Warrantee Certificates
I purchased this new (not refurbished).
I am selling it cause I no longer need it.
$95.00 Cash Postal Money Order or Paypal accepted.
Here are the Official Specs:
Bosch PS20-2 Specifications: � Voltage: 10.8V � Battery Technology: Lithium Ion (Li-Ion) � Trigger Type: Variable Speed, Reversible � Chuck: 1/4" Hex � Clutch Settings: 10+1 � No Load RPM: 0-400 � Torque: 80 in. lbs. � Length: 6-1/2" Bosch PS20-2 Includes: � (1) -- Carrying Case � (2) -- 1.5" Power Drive Bits � (1) -- 30 Minute Charger � (2) -- Litheon 10.8V Batteries Bosch PS20-2 Features: � Looks Small. Works Big. � Very handy and easy to carry in a tool belt � Drives 100 3" screws in one charge � ProVantage 3-year Protection Plan � Almost half the size of a 12V compact drill/driver � Built-in LED light illuminates the work, even in tight and hard to reach spaces � 80 in. lbs. of Torque - Drives 100 3-inch screws per battery charge � Ultra-Compact Power & Design - Almost half the size of a 12V compact drill/driver � LED Light - For tight spaces and applications � Forward/Reverse Button - Equally useful at driving or removing screws � Quick Change Chuck - Prevents bit loss in drill or drive mode Pull to insert or release 1/4" hex shank bits � 10+1 Clutch Enables precision driving and eliminates over torque in soft base materials. Max mode allows pilot and other small bore holes � Variable Speed Trigger For increased sensitivity and control

phone nextel sprint verizon att boost where you at new used telephone cell wire cable cord tradesman carpenter electrician electrical pipefitter plumber locksmith car van auto atv winch harley motorcycle talk ptt sim card simcard toy antique gps construction concrete drill chip chop tool Micro driver drill tools kit new used wrench socket saw bit blade torque mechanic socket tool tradesman plumber electrician locksmith carpenter home owner

IDEAL FISH TAPE 200' NEW IN BOX (GLENVIEW NORTHBROOK) $50

2009-11-12T07:11:35-06:00

200 FOOT IDEAL FISH TAPE NEW IN BOX.
IDEAL CAT# 31-025
200' BY 1/8" STEEL TAPE.
I HAVE 4 OF THESE AND THEY ARE $50.00 EACH CASH.

ELECTRICAL ELECTRICIAN TRADESMAN PLUMBER COMPUTER WORK REMODEL NEW WIRING CABLE NEW USED LIGHTING PULL BOX LIGHT DIMMER phone nextel sprint verizon att boost where you at new used telephone cell wire cable cord tradesman carpenter electrician electrical pipefitter plumber locksmith car van auto atv winch harley motorcycle talk ptt sim card simcard toy antique gps construction concrete drill chip chop tool
CALL 866-388-2088.

LEATHER TOOL POUCHES LOT OF 4 (GLENVIEW NORTHBROOK) $50

2009-11-12T07:03:12-06:00

LOT OF 4 DIFFERENT TOOL POUCHES.
1) ELECTRICIAN POUCH BY CRAFTSMAN
1) ELECTRICIAN POUCH BY ROOSTER
1) TAPE MEASURE RULER HOLDER BY AMERICA'S BEST
1) DRILL/TOOL HOLDER BY AMERICA'S BEST.
$50.00 FOR ALL 4 POUCHES.
WILL NOT SEPARATE.

ELECTRICAL ELECTRICIAN TRADESMAN PLUMBER COMPUTER WORK REMODEL NEW WIRING CABLE NEW USED LIGHTING PULL BOX LIGHT DIMMER CARPENTER PLUMBER phone nextel sprint verizon att boost where you at new used telephone cell wire cable cord tradesman carpenter electrician electrical pipefitter plumber locksmith car van auto atv winch harley motorcycle talk ptt sim card simcard toy antique gps construction concrete drill chip chop tool
CALL 866-388-2088.

Acetylene/Oxygen torch (BrynMawr & Nagle (right off Kennedy 90 )) $90

2009-11-12T00:22:21-06:00

-has all brass connectors
-works well
-has 2 tanks and cart
-has gauges

Right off of BrynMawr & Nagle (right off Kennedy 90 )

$90.00

Call Rich at 773.789.8535

welder (BrynMawr & Nagle (right off Kennedy 90 )) $70

2009-11-12T00:18:45-06:00

-300 coninuous amp
-works well
-rarely used
-great for a beginner

Right off of BrynMawr & Nagle (right off Kennedy 90 )

$70.00

Call Rich at 773.789.8535

Senco brad nailer set/kit - BRAND NEW (BrynMawr & Nagle (right off Kennedy 90 )) $90

2009-11-12T00:16:28-06:00

-Costs $170 in the store
-Brand new ....never used
-All parts shown in pictures
-3 tools
-bag included

$90.00

Right off of BrynMawr & Nagle (right off Kennedy 90 )

Call Rich at 773.789.8535

Safety Speed Cut Panel Saw (Antioch, IL (lake county)) $600

2009-11-11T21:41:45-06:00

Safety speed cut panel saw in good shape. Milwaukee saw. $600 located in Antioch. Call Brian 847-668-1968

Email for pics. File to large to put on CL. joele78@hotmail.com

Delta 10" Table Saw (Antioch, IL (Lake County)) $500

2009-11-11T21:41:36-06:00

Delta 10" table saw on a rolling base. Extra long fence, 2 HP, good shape. $500 located in Antioch. Call Brian 847-668-1968

Email for pics joele78@hotmail.com

MINUTEMAN 20" 2-SPEED FLOOR MACHINE (gurnee) $200

2009-11-11T19:34:21-06:00

Minuteman front runner floor machine

This machine is in good used condition, runs great

< ASKING $200

MODEL NO M20120-02

The Dual Speeds come equipped with 1 1/2 hp motors and run at either 175 or 300 rpm by a simple flip of a switch

Floor machine , burnisher ,industrial machine, cleaning services supplies, janitorial

Peerless Gas Furnace (Lakemoor, IL) $300

2009-11-11T19:09:36-06:00

Peerless gas powered furnace for sale, good running condition. Email theshop815@yahoo.com with any questions

Yale Forklift Truck (Lakemoor, IL) $700

2009-11-11T19:07:31-06:00

Yale forklift truck, gasoline powered, runs great. Please email theshop815@yahoo.com with any questions

14 ft Workbench- Perfect for any Workshop (Waukegan) $350

2009-11-11T18:44:43-06:00

Large 14ft workbench. 2 levels. 8 metal drawers. Great for any workshop or garage.
Drop me an email or call me if you would like to check it out. Let me know if you have any questions. I can send out more pictures upon request.

Thanks
Brian
847-785-9079
B_E_Karas24@yahoo.com

@@@@ WORK TABLE ON WHEELS / ROLLING SHELF!!! (Glenview Northbrook near 294 and Willow ) $125

2009-11-11T17:52:52-06:00

For sale is this Rolling cart or Rolling Table. I CAN DELIVER IF YOU ARE LOCAL...
It assembles and disassembles easily as you can see in the pictures.
It is perfect for storing things on and the best part is it is on rubber wheels so you can move it around!!!
Great for tradesmen or homeowners. You can put your tools or household materials on it and move it around as needed.
It measures:
3 feet by 5 feet
It is 7-1/2" From the floor to the top of the lower shelf
It is 37-1/2" From the floor to the top of the upper shelf.
Two of the wheels swivel so it is easy to maneuver.
$125.00 Cash only.
ENTER mistuff in search line to see other items for sale.
NO CRAZY SCAMMERS PLEASE!!!
I have two of these and they are $125.00 EACH.
keyword: carpenter wood plumber electrician tradesman cut shelves toy new used locksmith trade hobby blade cut power tool cord plug construction mechanic pipefitter real estate home house garage construction site kitchen shelf

ENGINE stands, cranes, degreasers (Northside of Chicago)

2009-11-11T17:07:48-06:00

ENGINE STANDS , CRANES , PARTS CLEANERS & ACCESSORIES
� Rhino engine stand, capacity = 750 lbs. , new in box ��69.00
� ATD #7482 engine stand, capacity = 1250 lbs. , new in box��.150.00
� ATD # 7480 engine stand, capacity = 1250 lbs. , new ,foldable��..220.00
� Used 3 leg engine stand, capacity = 1000 lbs. ��95.00
� SNAP-ON # CES1B engine stand, capacity = 1250 lbs. , like new, 200.00 cost 329.95
� BLACKHAWK # 67566 H.D. capacity = 1000 lbs. ,4 leg, like new 260.00 cost 589.50
� Commercial , heavy duty, extra long legs, large diam. 3 leg, 1500lbs. used 225 and 300
� Truck diesel engine stand, rotisserie head, 3000 lbs. capacity, used��. 600.00
� Engine load leveler � ton��.50.00
� Engine lifting sling � ton��.20.00
� Transverse engine support bar kit��..90.00
� Rhino # RTO-10141 foldable crane 2 ton, new in box��..360.00
� ATD #7485 foldable crane, 2 ton, new in box��..430.00
� AC DELCO # 34132 foldable crane , 2 ton , like new��..285.00
� CIA # 2500 red engine crane, 2 ton , great condition��.225.00
� Ruger # HP1/2B blue engine crane � ton , made in USA , less ram �� 200.00
� Walker # 93809 blue engine crane � ton, made in USA��250.00
� Blackhawk # 67574 red engine crane 1 ton, H.D. made in USA��.675.00
� Heavy Duty rolling gantry, made in USA��.2900.00
� Graymills #T 4330B , large turbo-action , parts washer,USA�1850.00 cost 3569.00
� Graymills # 300A, medium size turbo-action , parts washer ,USA 650.00 cost 1727.00
� Smart Washer , 30 gallon # 23 aqueous,with heater, USA 975.00 cost 2475.00
� Branson ultrasonic cleaner # B-220H, USA��.350.00
� Snap-on hydro pressure blast # PBC42��2,150.00 cost 6,186.05
� Cuda # H20-2412 aqueous H.D. parts washer��. 2250.00 cost 5296.00
� ATD #8324 5 gallon benchtop washer with pump��new��..65.00
� Safety � Cleen small parts cleaner with strainer, 1 gallon��.55.00
� 20 gallon, parts washer with pump��.180.00
� 40 gallon, parts washer with pump��..240.00
� 30 gallon H.D. parts washer with pump & light��..275.00
� 40 gallon H.D. stainless steel top, washer, with pump & light��395.00
� Please call ED at 773-267-8357 at work for more information.

HAND TRUCKS - 4 WHEEL (EVANSTON)

2009-11-11T16:02:44-06:00

2 - 4 WHEEL ANTIQUE HAND TRUCKS

CALL ED AT (800) 526-1300

Cement Mixer Eelectric 110volts (NWS) $155

2009-11-11T14:51:56-06:00

I have a almost brand new Cement mixer .I was traded it for some motor parts Looks brand new don't have any name on it .Looks to be about a 2 bags mixer.

Fein multi master wanted

2009-11-11T14:06:49-06:00

WANTED, FEIN MULTI MASTER LIGHTLY USED OR NEW FROM HOME OWNER, NOT TRADE GUY.312-237-0910

BANDSAW BLADES 14'9" X 1" X 6 TPI (WHEELING, ILLINOIS)

2009-11-11T14:04:13-06:00

STERLING BANDSAW BLADES (MADE IN USA)

14'-9" X 1" X .035" X 6TPI

CARBON STEEL (FOR WOOD OR SOFT METALS)

$10.00/BLADE 10 BLADES AVAILABLE

Location: WHEELING, ILLINOIS
it's NOT ok to contact this poster with services or other commercial interests

ABRASIVE BELTS 4" X 90" X 400 GRIT (WHEELING, ILLINOIS)

2009-11-11T14:03:14-06:00

NORTON (MADE IN USA) 4"W X 90"L X 400 GRIT

DURITE (W427) NORLOK BELT FOR METAL FINISHING

NEW IN ORIGINAL FACTORY PACKAGING

5 BELTS/BOX 25 BOXES AVAILABLE

$9.99/BOX

BANDSAW BLADES 64-1/2" X 1/2" X .025" X 14 TPI - RAKER (WHEELING, ILLINOIS)

2009-11-11T14:02:09-06:00

BANDSAW BLADES 64-1/2" X 1/2" X .025" X 14 TPI - RAKER SET

CAPEWELL BRAND - - - EDP# 4106469

FLEXBACK - CARBON STEEL (FOR WOOD, SOFT METALS AND PLASTICS)

NEW - - - IN ORIGINAL FACTORY PACKAGING

40 AVAILABLE

$2.99 EACH

BRAD POINT DRILLS FOR WOOD (WHEELING, ILLINOIS)

2009-11-11T13:59:03-06:00

BRAD POINT DRILLS (FOR DRILLING IN WOOD AND SOFT PLASTIC)

BOSCH 1/2" DIAMETER PART #T4011 SHANK DIAMETER 3/8" FLUTE LENGTH 3" OVERALL LENGTH 6"

BOSCH 7/16" DIAMETER PART #T4010 SHANK DIAMETER 3/8" FLUTE LENGTH 3" OVERALL LENGTH 5-1/2"

NEW - IN ORIGINAL FACTORY PACKAGING

MADE IN WEST GERMANY $1.00 EACH 100'S AVAILABLE

ALSO AVAILABLE 7/32" DIAMETER SHANK DIAMETER 1/4" FLUTE LENGTH 2" OVERALL LENGTH 6"

MADE IN USA BY T.I.S. ENTERPRISES - SPRINGFIELD, PA.

NEW - IN ORIGINAL FACTORY PACKAGING

50 CENTS AEACH 100'S AVAILABLE

Matco Tool Box (McHenry) $850

2009-11-11T13:21:19-06:00

Selling a matco tool cart, model number MSC12SVC. Bought for 1300 new, asking 850 or best offer. Orange with black handles. If you want pictures I can email them to you, if not I work at Gary Lang in McHenry you can stop by and look if interested. Email is tcollinsjr@comcast.net. Good Condition, only year and a half old.

52" Foot Shear

2009-11-11T13:05:50-06:00

Tennsmith 52" 16 Ga. Foot Shear http://tylershvacequipment.com/cart/foot-shears-c-7.html Call Ryan (847) 971-1422 will ship!

Tennsmith 8' Brake (Will Ship)

2009-11-11T13:02:58-06:00

Tennsmith 8' Sheet Metal Brake 18 Ga. and Lighter Please Call Ryan (847) 971-1422 http://tylershvacequipment.com/cart/sheet-metal-brakes-c-8.html

BANDSAW BLADES 15'- 4" X 1-1/4" (WHEELING)

2009-11-11T13:02:54-06:00

Starrett Bandsaw Blade (Made in USA) - Brand new in the original factury packaging

15'- 4" x 1-1/4" x .042" x 3/4 TPI - Varicat

http://www.starrett.com/pages/1499_band_saw_blades.cfm

For heavy cutting in tough materials

$40.00 each

Four available

Bandsaw Blades: 14'-10" x 3/4" x18/14 tpi (Wheeling, Illinois)

2009-11-11T12:59:21-06:00

Bandsaw Blades: Sterling (Made in USA) 14'-10" x 3/4" x .035" x 18/14 tpi -Vari-Pitch

New Wave Matrix II - For metal cutting

http://www.diamondsaw.com/catalog.htm

Box of two blades - $10.00 total ($5.00/blade)

Two boxes available

Bandsaw Blades 11'-11" x 1/4 x 14TPI (Wheeling, Illinois)

2009-11-11T12:58:10-06:00

Bandsaw Blades: (Sterling - Made in USA) 11'11" x 1/4" x 14 TPI

Tri-Temp - Metal Cutting

Box of 10 for $ 50.00 total price ($5.00/blade)

Bandsaw Blades 7' - 0" x 3/4" x 10 TPI (Wheeling, Illinois)

2009-11-11T12:57:04-06:00

Bandsaw Blades: (Starrett - Made in USA) 7'-0" x 3/4" x .035" x 10 TPI - Regular Set
Powerband Matrix II for Metal Cutting

Box of 6 blades for $30.00 total ($5.00/blade)

Lockformer (Free Shipping) $2195

2009-11-11T12:56:31-06:00

RAMS Model 24 Ga. Pittsburgh Machine with Lifetime Service Gaurntee!

Call Ryan (847) 971-1422

BANDSAW BLADES 9'-0" X 1/2" X .025" X 4 TPI - HOOK (WHEELING, ILLINOIS)

2009-11-11T12:55:56-06:00

BANDSAW BLADES (STARRETT -MADE IN USA) 9'-0" X 1/2" X .025" X 4 TPI - HOOK PATTERN

FLEXIBLE BACK

http://www.starrett.com/pages/1499_band_saw_blades.cfm

FOR CUTTING WOOD AND OTHER SOFT MATERIALS

$4.00 EACH / 15 BLADES AVAILABLE

Bandsaw Blades 10'-5" x 3/4 x 10 TPI (Wheeling, Illinois)

2009-11-11T12:54:48-06:00

Starrett Bandsaw Blades (made in USA) 10'-5" x 3/4" x .032" x 10 TPI - Regular Set - Metal Cutting

Box of 8 blades for $50.00 total ($6.25/blade)

RAMS 20 Gauge Pittsburgh Machine (Kensoha) $3695

2009-11-11T12:47:00-06:00

Rams 20 Ga. Pittsburgh Machine is more than a tradtional pittsburgh machine. The unit can be set up to form 5 different roll forms. The roll forms include Pittsburgh Lock, Male Pittsburgh Flange, Right Angle, Drive Cleats, and Acme or (pipelock).

Capacity: 20 Ga. Max -28 Ga. Min. Mild Steel
Speed: 25 FPM
Dimensions: 36" Long X 17" Wide X 34" High
Wieght: 350lbs
Discreption:
The unit comes with a 1 H.P. electric motor, 115/208-230V, 1,725 RPM. We use Torrington Needle Bearings and hardened steel components throughout (62 Rockwell). The cabinet is heavy gauge steel with a Hammertone Green Finish.

RAMS Equipment produces the highest-quality American made equipment in the industry. They offer a superior warranty and service along with innovative user friendly machinery that is always on the forefront of technology. Rams has instituted many quality safeguards. These safeguards are to insure the parts they manufacture are dimensionally correct and always fully traceable. These parts are always in stock to ensure that we can meet all customers� demands.

CALL RYAN (847) 971-1422

Pittsburgh Machine (Kenosha) $2195

2009-11-11T12:39:13-06:00

This RAMS 24 Ga. Pittsburgh Machine also known as a lockformer has a 2 year warranty and is backed with lifetime product support! This product is always in stock and ready to ship upon request.

Capacity: 24 Ga. Max-28 Ga. Min. Mild Steel
Approx. Speed: 35 FPM
Dimensions: 36" Long X 16 " Wide X 34" High
Approx Weight: 110 LBS
Discription:

The unit comes with a 1/2 H.P. electric motor, 115/208-230V, 5.4 AMPS 60 cycle single phase. We use Torrington Needle Bearings and hardened steel components throughout, 62 Rockwell. The cabinet and optional stand are heavy gauge steel with a Hammertone Green Finish.

RAMS Equipment produces the highest-quality American made equipment in the industry. They offer a superior warranty and service along with innovative user friendly machinery that is always on the forefront of technology. Rams has instituted many quality safeguards. These safeguards are to insure the parts they manufacture are dimensionally correct and always fully traceable. These parts are always in stock to ensure that we can meet all customers� demands.

CALL RYAN (847) 971-1422

Bandsaw Blade 13'0" x 1/2" x 18TPI (Wheeling, Illinois)

2009-11-11T11:35:10-06:00

Bansaw blades: Sterling (USA-Made) 13' -0" x 1/2" x .020" x 18 TPI

Super -Weld MX Bi-Metal (for metal cutting) - Raker Set

$10.00/bx of two blades

BANDSAW BLADE 5' - 6-1/2" (Wheeling, Illinois)

2009-11-11T11:34:06-06:00

Sterling 5'- 6-1/2" x 1/4" x .025" 10 tpi bandsaw blade

"Tri-Temp" for metal cutting

Made in USA by Diamond Saw Works

http://www.diamondsaw.com/catalog.htm

$15.00 for a box of 10 blades

Abrasive Belt 3" x 132" x P240J (WHEELING, ILLINOIS)

2009-11-11T11:32:56-06:00

Norton 3" x 132" x P240J Abrasive Belt
P/N 26322 - Norlok Metalite Belt
(for metal finishing)
$10.00 for a box of 10 belts
20 boxes available

MORRIS TOOLING SPINDLE EXTENSION 3533577/00/A (WHEELING, IL)

2009-11-11T11:27:01-06:00

MORRIS TOOLING SPINDLE EXTENSION PART #3533577/00/A

http://www.morristooling.com/downloads/catafrags/automotive_toolholders_2006_10_12.pdf

18 AVAILABLE--- NEW, OLD STOCK ----$4.95 EACH

matco tool box (mchenry) $850

2009-11-11T10:45:39-06:00

Matco tool cart for sale. paid 1200 new asking 850 or best offer. year and half old. Orange with black handles. Model number MSC12SVC. Good condition. Will email pictures if needed. Also I work at Gary Lang in mchenry, can stop by and look if interested. Email is tcollinsjr@comcast.net

vehicle lettering, magnetics, decals

2009-11-11T10:32:36-06:00

15 years experience in vehicle graphics, digital designs, magnetic signs for less then competion call and save asap 708-743-9653, home based i can come to you if necessary, next day service. Email or send your info i will design you a drawing based on your info asap and save you money

Belt&Disc sanders2'x6"x42"Crftsm!Brand new in box! (Chicago by fullerton and damen) $50

2009-11-11T09:43:56-06:00

Model 21513, new in box .$129 new, Price $50 each have more than one. Call bob 847-791-3104

Delta 10" Contractor's Table Saw (Deerfield) $295

2009-11-11T09:35:55-06:00

Offering used Delta 10" Contractor's Table Saw. Complete with blade, fence. General good condition, some minor rust on table from non-use. Will consider curbside delivery for $.39/mile each way. Questions welcome.

8in horzontal mitring saw Dayton New (North chicagoland) $850

2009-11-11T08:29:06-06:00

single phase machine on wheels new

Call 1-773-329-1296

FOR SALE PANEL SAW (DES LPAINES) $4700

2009-11-11T07:33:20-06:00

SCMI I-320 panel saw scoring 9hp 3 phz made in italy 1998
asking 4700$
call 773 895 3859 for info

MAKITA BOX, DRILL/IMPACT GUN SPOTS, 2-18V BATTERIES, W/DC18RA CHARGER! (WHEELING, IL. 60090) $200

2009-11-11T01:38:55-06:00

UP FOR SALE :

1- MAKITA BOX, "DRILL///IMPACT GUN BOX"..... ONLY BOX!....... ( DRILL AND IMPACT GUN NOT INCLUDED! )...... ROOM / SPOTS FOR EXTRA BATTERY AND CHARGER INSIDE BOX....... ( BRAND NEW )

1-MAKITA DC18RA CHARGER............... ( BRAND NEW )

2-MAKITA 18V LITHIUM - ION BATTERIES........... ( BRAND NEW )

EVERYTHING CAN BE SOLD ALL TOGETHER, OR SOLD SEPARATELY, WHATEVER YOU WANT, WHATEVER YOU NEED.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

DONT MISS OUT ON A GREAT DEAL! ALL OF THESE ITEMS COMBINED ARE WORTH MORE THAN $ 200.00 RETAIL PRICE ANYWHERE.

OR BUY SEPARATELEY??????????????????????

PLEASE CONTACT :

E - MAIL......... jmurray88@sbcglobal.net

PHONE............ ( 847 ) 454 - 6288

THANK YOU!

Greenlee 882 (Skokie) $650

2009-11-10T23:40:31-06:00

Excellent condition Greenlee 882 flip top bender with 1-1/4" EMT shoe, saddle and follow bar. Also included is the hand pump and gang box.

Brand New Scaffolding/Cross Braces/Plank (Tinley Park) $60

2009-11-10T22:58:04-06:00

I'm selling Several BRAND NEW RED SCAFFOLDING, 16 BLACK CROSS BRACES, AND 16 SCAFFOLDING PLANKS. The scaffold are 6 foot 6inches by 5 foot walk through scaffold with ladders. There $60.00 a leg. The Cross braces have 2 settings on them. Those are being sold for $20.00 a peice. The scaffolding plank are 8 foot long. Those are being sold for $20.00 a peice. Those planks are Osha approved and meet all standards set by Osha!!! Everything here is BRAND NEW!! I will seperate if needed. If you need more than what you see here I can deliver on any size order you want to place. I will not take less than the asking price on here. Please call (708)927-7138

ARMSTRONG Extra Large 7 Combination Wrench 2"- 2 1/2" (Milwaukee) $150

2009-11-10T21:55:33-06:00

I am located 40 miles north of IL border just off I-94. (7) very large Armstrong Armaloy combination wrenches, sizes 2", 2 1/16", 2 1/8", 2 3/16", 2 1/4", 2 3/8", and 2 1/2". Price is $150 for all seven. Email or call 414-651-6664. Best time to call is Noon- 5PM M-F or any time on weekends. If I cannot answer please leave a message and phone number and I will get back to you within 1 hour. Thank You.

ARMSTRONG 32 PIECE 3/4 IN DRIVE 12PT SOCKET SET W/CASE Exc. Condition (Milwaukee) $350

2009-11-10T21:49:07-06:00

I am located 40 miles north of IL border just off I-94. This is a very Industrial 3/4" socket set, Lifetime warranty with free replacement, Armstrong is known to be the King of Large Tools with reputation that exceeds Matco or Snap-On, this set is in excellent condition and there are (26) 12pt sockets with sizes 3/4" through 2 5/16" + 2 extra's, there is a ratchet, extensions, breaker bar, t wrench, knuckle, and case, tool set model number is 16-413, this set is a great set for truck mechanics, set must weigh 100+ lbs. for I cannot lift it, neck it is on a dolly just to get it out of the garage. Please see my other posting for Industrial Armstrong Combination Wrenches. Price is $350 for complete set, this set sells for over $1200. Email or call 414-651-6664. Best time to call is Noon- 5PM M-F or any time on weekends. If I cannot answer please leave a message and phone number and I will get back to you within 1 hour. Thank You.

Woodworking Table and Lumber (Ashland & Lawrence) $200

2009-11-10T17:45:53-06:00

*Solid maple work bench. 3'x 6' with bench dogs and vice. In excellent condition. $200.

*Numerous large dimension domestic hardwood cut offs and scraps. Giving much of it away and selling select pieces.

Please contact Hans via email at hvh.ones@gmail.com or phone me at 773.956.4802.

Industrial Grade paint sprayer Honda motor $500 obo $500

2009-11-10T12:36:21-06:00

I have a gas paint sprayer with Honda motor for sale they fire right up and have been indoor at all times. They got a good cleaning and run great. I dont know much about them since im selling them for a friend but I will do my best too help. They need too go they take up alot of room i need them gone asap.

1 1/2 hsp Tornado Floor Machine $600

2009-11-10T12:05:37-06:00

I have this 4yr old Tornado with carpet pad. grinding pad with stones, pad for vinyl floor polishing, and I have the copper pads with diamond for concrete. This machine is a business in it's self. It can be used for Cleaning Carpets,Stripping & Polishing Vinyl Tile, Ceramic & Marble. Prep garage floors for a perfect smooth finish to set a sealer or enamel on garage floor. It will grind or sand concrete getting it ready for any floor you need to install. I use it to prep subfloors for underlayment, no need for hand and knees scrapping.

Toe Kick saw (skokie il) $125

2009-11-10T12:03:43-06:00

This tool has only about 25hrs on it.

grinder , stihl saw,paslode framing gun,natural gas blower, kerosene b (north chicago)

2009-11-10T11:32:27-06:00

LOCATION .3209 N NATCHEZ CHICAGO IL 60176 773 865 4373
master heater (natural gas) 150.000 BTU -450.00 100 FT HOSE INCLUDING
kerosene heater 60 000 BTU 75.00
makita grinder with concrete blades
stihl saw - 400.00

KOBALT - TOOL BOX FOR PICKUP TRUCK BED (grayslake) $199

2009-11-10T11:20:55-06:00

Kobalt Contractor Tool Box for pickup trucks
FULL SIZE
69" across - measuring the box itself at the top
58" inside - measuring the distance for inside the truck bed

KEYS - able to lock either side independantly

lincoln electric welder 3200 hd (north chicago) $400

2009-11-10T11:13:36-06:00

LOCATION
3209 N NATCHEZ CHICAGO IL 60634
773 865 4373
LINCOLN WELDER 3200 HD (ARGON)
USED ONLY FEW TIMES

Impact wrench (Lake Villa, Il.) $25

2009-11-10T10:58:29-06:00

Chicago pneumatic 1/2" drive impact wrench in like new condition. Terms Cash & carry.

Dremel Tool (Lake Villa, Il.) $20

2009-11-10T10:55:07-06:00

The tool is in excellent condtion, it also comes with many bits and other accesories. Terms cash & carry.

Dayton vertical Metal cutting band saw,mod 914,brand new! (chicago) $1650

2009-11-10T10:51:55-06:00

fpm-70-580, new price is $3400 call 847-791-3104

Craftsman belt&disc Sander,2"x6'x42"Brand new in box! (chicago,damen &fullerton) $50

2009-11-10T10:38:53-06:00

Model 21513 new price is $129, we have more than one,call 847-791-3104 BOB 2" width, 6" disc.42" length

Heavy duty 6"bench Vises,brand new! (chicago) $100

2009-11-10T10:38:38-06:00

Shop king, brand mod. 905321, . call Bob 847-791-3104

Misc snap-on, matco, craftsman and boxes (Il/Wi border) $225

2009-11-10T10:09:55-06:00

Snap-on timing light w/case, snap-on 3/8" and 1/2" ratchets, snap-on 15/16", 1", 1 1/8" combo wrenches, snap-on side cutter, couple snap-on screwdrivers, misc snap-on, matco, and craftsman sockets, 2pr klein needle nose pliers, a craftsman 3 drawer box and a waterloo 3drawer w/ lower compartment bottom box and more, all for $225

ROLLING LADDERS (EVANSTON LOCATION)

2009-11-10T10:08:10-06:00

TWO ROLLING LADDERS AVAILABLE

1 - 4 step

1 - 7 step

CALL LANERS BILLIARDS,INC.

ASK FOR ED TO MAKE ARRANGEMENTS TO SEE

EVANSTON LOCATION

(800) 526-1300

Slide Sledge slide hammers plus many tips $800 obo (Deerfield) $800

2009-11-10T10:01:29-06:00

I have some barely used Slide Sledge hammers and tips that I need to get rid of. I bought these to use at a previous employer but no longer need them. These tools work great and take a lot of the work out of using sledge hammers, etc.. I would like to sell it all together but may seperate. I have a 14lbs 30" hammer, a 21lbs 46" hammer, and about 13 ends including pin drivers, tie rod/ball joint seperators, and some curved chisel tips. I also have a 5lbs weight for the hammers for a little harder hit. I am asking $800 obo for everything and I paid around 1500-1600. Please write an email or call 847-276-1486 thank you my name is Ryan. Please leave a message.

Snow Blower 139 CC (Waukegan) $200

2009-11-10T10:00:44-06:00

Barely used snow blower. It runs great its almost new. Gas and Electric Start. Will accept offer.

Also have a Garage Heater for sale accepting $200 o.b.o. 150,000 BTU

Tel (224)637-0369

CROWN MOULDING 6PC SET (IL) $75

2009-11-10T09:10:02-06:00

hotnsweetpea@hotmail.com
MUST CALL SONJA AT 847.201.6154

C-3 BIT 6PC SET
BY LIFE TIME CARBIDE
ON EBAY THIS ITEM IS $90
OTHER WEB SITS IT IS $100.00 NEW

YOU PAY $75.00 SERIOUS INQUIRIES MUST CALL

Craftsman 13in wood planer New 2 1/2hp (north chicagoland) $199

2009-11-10T08:59:41-06:00

still in the box new cost over $400

Call 1-773-329-1296

***WEATHERGUARD KNAACK LADDER RACK FOR GM CHEVY BRAND NEW (Glenview Northbrook 294 and Willow Rd.) $299

2009-11-10T08:59:05-06:00

***IF YOU ARE READING THIS THE ITEM IS STILL AVAILABLE!!! *** Weather Guard Knaack 3 section Ladder Rack will fit Chevrolet and GM models from 1999 to 2009.
These are brand new in the box.
$299 Cash
It comes with all of the clamps and screws/bolts for a complete installation.
Contact me if you are interested. phone nextel sprint verizon att boost where you at new used telephone cell wire cable cord tradesman carpenter electrician electrical pipefitter plumber locksmith car van auto atv winch harley motorcycle talk ptt sim card simcard toy antique gps construction concrete drill chip chop tool phone nextel sprint verizon att boost where you at new used telephone cell wire cable cord tradesman carpenter electrician electrical pipefitter plumber locksmith car van auto atv winch harley motorcycle talk ptt sim card simcard toy antique gps construction concrete drill chip chop tool lawn grass sweep broom lawnscaper lawnscaping atv mower hitch lift tow hook new used rake shovel tool yard implement mow mower tractor weedeater string trimmer trim hose water

SCMI I-320 (des plaines) $4700

2009-11-09T20:26:56-06:00

for sale sliding panel saw scmi 320 1998 9hp 3phz scoring
call 773 895 3859 for details

Brand New Dewalt Nano 18 Volt Lithium Ion Batteries (pulaski and devon) $65

2009-11-09T20:25:32-06:00

BRAND NEW NEVER USED AND IN THE PACKAGE DEWALT NANO 18 VOLT LITHIUM ION BATTERIES AT 65.00 EACH AND I AHVE A COUPLE OF THE NEW NANO/ XRP BATTERY CHARGERS AVAILABLE AT 35.00 EACH CALLS ONLY PLEASE TO BILL AT 773-266-6117

Cordless drill (park ridge) $35

2009-11-09T20:07:20-06:00

"All-Power America" 18 volt soft touch, powerful industrial motor, variable speed: 0-400 rpm/0-1150 rpm, 3/8" jacobs keyless chuck, 17 torque settings, reversible with electric brake, includes charger, high performance 18v rechargeable nicd battery,6 drill bits,6 driver bits, 1bit holder, blow molded case. New in box, never used, was a Christmas gift from 2 years ago. cash only.

Air Duct Cleaning Equipment (Gurnee Area) $3000

2009-11-09T20:06:09-06:00

Abatement Technology Air Duct Cleaning machine, Aire Sweep gas operated air compressor and fogger. All comes as a package deal. Serious buyers only. If you were to purchase this package new it would cost you $13,000. This package is in good condition. Please call 847-409-3254 ASKING $3,000 o.b.o.

Sheet Metal Hand Shears (park ridge) $15

2009-11-09T19:56:31-06:00

Kraeuter brand,1 straight,1 radius cut. Has some rust. $15 for both. cash only.

Craftsman 3/8" drill (park ridge) $10

2009-11-09T19:51:31-06:00

1200 rpm,reversible, works great, cash only.

Jackson welding helmet (park ridge) $35

2009-11-09T19:46:03-06:00

1979 certified model with extra lenses. cash only

LEATHER TOOL POUCHES LOT OF 4 (GLENVIEW NORTHBROOK) $50

2009-11-09T19:43:38-06:00

IDEAL FISH TAPE 200' NEW IN BOX (GLENVIEW NORTHBROOK) $60

2009-11-09T19:07:49-06:00

200 FOOT IDEAL FISH TAPE NEW IN BOX.
IDEAL CAT# 31-025
200' BY 1/8" STEEL TAPE.
I HAVE 4 OF THESE AND THEY ARE $60.00 EACH CASH.

ELECTRICAL ELECTRICIAN TRADESMAN PLUMBER COMPUTER WORK REMODEL NEW WIRING CABLE NEW USED LIGHTING PULL BOX LIGHT DIMMER phone nextel sprint verizon att boost where you at new used telephone cell wire cable cord tradesman carpenter electrician electrical pipefitter plumber locksmith car van auto atv winch harley motorcycle talk ptt sim card simcard toy antique gps construction concrete drill chip chop tool
CALL 866-388-2088.

%%% Bosch PS20 10.8 Volt Cordless Driver Drill Kit %%% (Glenview or Northbrook or Wheeling) $95

2009-11-09T19:05:54-06:00

Very slightly used :
Bosch PS20 Litheon Cordless Drill Driver
Comes with everything in the pictures:
1) Drill
1) Phillips Bit
1) Flat Blade Bit
2) Batteries
1) Charger
1) Zippered Carrying Case
All Owners Manuals and Warrantee Certificates
I purchased this new (not refurbished).
I am selling it cause I no longer need it.
$95.00 Cash.
Here are the Official Specs:
Bosch PS20-2 Specifications: � Voltage: 10.8V � Battery Technology: Lithium Ion (Li-Ion) � Trigger Type: Variable Speed, Reversible � Chuck: 1/4" Hex � Clutch Settings: 10+1 � No Load RPM: 0-400 � Torque: 80 in. lbs. � Length: 6-1/2" Bosch PS20-2 Includes: � (1) -- Carrying Case � (2) -- 1.5" Power Drive Bits � (1) -- 30 Minute Charger � (2) -- Litheon 10.8V Batteries Bosch PS20-2 Features: � Looks Small. Works Big. � Very handy and easy to carry in a tool belt � Drives 100 3" screws in one charge � ProVantage 3-year Protection Plan � Almost half the size of a 12V compact drill/driver � Built-in LED light illuminates the work, even in tight and hard to reach spaces � 80 in. lbs. of Torque - Drives 100 3-inch screws per battery charge � Ultra-Compact Power & Design - Almost half the size of a 12V compact drill/driver � LED Light - For tight spaces and applications � Forward/Reverse Button - Equally useful at driving or removing screws � Quick Change Chuck - Prevents bit loss in drill or drive mode Pull to insert or release 1/4" hex shank bits � 10+1 Clutch Enables precision driving and eliminates over torque in soft base materials. Max mode allows pilot and other small bore holes � Variable Speed Trigger For increased sensitivity and control

phone nextel sprint verizon att boost where you at new used telephone cell wire cable cord tradesman carpenter electrician electrical pipefitter plumber locksmith car van auto atv winch harley motorcycle talk ptt sim card simcard toy antique gps construction concrete drill chip chop tool Micro driver drill tools kit new used wrench socket saw bit blade torque mechanic socket tool tradesman plumber electrician locksmith carpenter home owner

CRAFTSMAN SHOP VAC VACUUM (Glenview Northbrook) $75

2009-11-09T19:04:52-06:00

Craftsman Shop Vac. Comes with everything you see in the pictures.
$75.00 Cash.
Works Great!!!

phone nextel sprint verizon att boost where you at new used telephone cell wire cable cord tradesman carpenter electrician electrical pipefitter plumber locksmith car van auto atv winch harley motorcycle talk ptt sim card simcard toy antique gps construction concrete drill chip chop tool

@@@ GREENLEE METAL CUTTING DIES FOR HYDRAULIC PUMP 2-1/2" TO 4" (Glenview Northbrook 294 and Willow rd.) $300

2009-11-09T18:57:51-06:00

If you are reading this, the item is still available.

See my other listing for Greenlee 767 Hydraulic Pump and Die Set 1/2" to 2"
Greenlee metal cutting dies in the following sizes:
2-1/2"
3"
3-1/2"
4"
In very good working condition.
In original factory metal case.
Comes with everything you see in the picture.
$300 Cash.

phone nextel sprint verizon att boost where you at new used telephone cell wire cable cord tradesman carpenter electrician electrical pipefitter plumber locksmith car van auto atv winch harley motorcycle talk ptt sim card simcard toy antique gps construction concrete drill chip chop tool junction box boxes pullbox

### GREENLEE HYDRAULIC PUMP 767 AND 1/2" TO 2" CUTTING DIES#### (Northbrook Willow Rd and 294) $475

2009-11-09T18:56:59-06:00

If you are reading this, the item is still available.
Please check my other listing for Greenlee Hydraulic Dies Sizes 2-1/" 3" 3-1/2" 4".
Greenlee 767 Hydraulic Pump and metal punching dies.
In very good working condition.
In original factory metal case.
Comes with the following dies:
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2) sleeves
Comes with everything you see in the picture.
$475.00 Cash

phone nextel sprint verizon att boost where you at new used telephone cell wire cable cord tradesman carpenter electrician electrical pipefitter plumber locksmith car van auto atv winch harley motorcycle talk ptt sim card simcard toy antique gps construction concrete drill chip chop tool

+++BLACK & DECKER MACHO III ROTARY HAMMER +++ (Glenview Northbrook 294 and Willow Rd.) $200

2009-11-09T18:47:58-06:00

If you are reading this: it is still available.
Black & Decker Macho III Rotary Hammer.
Can be used for drilling holes in concrete or chipping concrete.
Uses spline bits and corebits up to 3"
In Excellent condition in the original factory case.
$200 cash

Keyword: phone nextel sprint verizon att boost where you at new used telephone cell wire cable cord tradesman carpenter electrician electrical pipefitter plumber locksmith car van auto atv winch harley motorcycle talk ptt sim card simcard toy antique gps construction concrete drill chip chop tool

MOBILE WIRE CART CADDY ON WHEELS WITH #12 SOLID WIRE. (NORTHBROOK GLENVIEW*WILLOW RD. AND 294**) $125

2009-11-09T18:45:35-06:00

*** If you are reading this, the item is still available*** THIS IS A MOBILE WIRE CADDY OR WIRE CART. IT HAS 2 WHEELS AND CAN BE USED IN THE HORIZONTAL OR UPRIGHT POSITION. SAVES YOU FROM LIFTING HEAVY SPOOLS OF WIRE ON THE JOBSITE. IT CAN HOLD SEVERAL DIFFERENT GAUGES OF WIRE DEPENDING ON WHAT YOU NEED. CAN HANDLE #14 #12 #10 AWG ETC. IT COMES WITH ALL OF THE NUMBER 12 SOLID WIRE THAT YOU SEE IN THE PICTURE. IT ROLLS PROPERLY AND WORKS AS IT SHOULD. MEASURES APPROX. 36" INCHES LONG BY 21" HIGH AND WIDE. IT IS NOT RUSTY AND IS IN OVERALL GOOD CONDITION. $125.00 CASH. IF YOU ARE READING THIS, IT IS STILL AVAILABLE... 866-388-2088

electrician electrical electric job wire cable spool solid stranded lift ladder tradesman alarm tools klein new used hvac heating cooling plumber control controlsphone nextel sprint verizon att boost where you at new used telephone cell wire cable cord tradesman carpenter electrician electrical pipefitter plumber locksmith car van auto atv winch harley motorcycle talk ptt sim card simcard toy antique gps construction concrete drill chip chop tool

***ROLLING WORK TABLE * SHELF UNIT ON WHEELS * MOBILE STORAGE UNIT** (Glenview Northbrook 294 and Willow Rd.) $125

2009-11-09T18:42:26-06:00

For sale is this Rolling cart or Rolling Table MOBILE SHELF WORKBENCH
Call 866-388-2088 to see it.
600 lb CAPACITY
If you are local, I can deliver this to you.
It assembles and disassembles easily as you can see in the pictures.
It is perfect for storing things on and the best part is it is on rubber wheels so you can move it around!!!
Great for tradesmen or homeowners. You can put your tools or household materials on it and move it around as needed.
It measures:
60" x 36" or 3' x 5' shelves.
It is 7-1/2" From the floor to the top of the lower shelf
It is 37-1/2" From the floor to the top of the upper shelf.
2) 5" swivel casters and 2) 5"rigid casters.
$125.00 Cash only.
NO CRAZY SCAMMERS PLEASE!!!
I have two of these and they are $125.00 EACH. phone nextel sprint verizon att boost where you at new used telephone cell wire cable cord tradesman carpenter electrician electrical pipefitter plumber locksmith car van auto atv winch harley motorcycle talk ptt sim card simcard toy antique gps construction concrete drill chip chop tool carpenter wood plumber electrician tradesman cut shelves toy new used locksmith trade hobby blade cut power tool cord plug construction mechanic pipefitter real estate home house garage construction site kitchen shelf

Steel City 14" Bandsaw (Glenview, IL) $350

2009-11-09T18:22:07-06:00

Steel City 14" Bandsaw includes:
-riser block
-light
-mitre gauge
-fence
$350 cash only please
Only serious offers
Available for pickup in Glenview, IL.

PARTNER SAW (BRISTOL WI) $450

2009-11-09T16:18:05-06:00

PARTNER SAW 1200 RUNS GOOD CARB JUST REBUIILT HAS NEW BLADE ON IT 847-406-0639 PETE

Stihl Cutsaw (60073) $750

2009-11-09T15:00:33-06:00

Stihl TS 400 Cutsaw. Bought brand new and used once on paver patio. Comes with diamond concrete and ashalt blades and custom wooden carrying case. Serious inquiries only. Less than 8 hours of use.

old 110 cfm gas powered compressor w ack hammers points an 100 ft hose (gurnee ) $1900

2009-11-09T14:30:45-06:00

its old but it works very well CALL BILL 8473438272

roller compactor w/ trailer (gurnee) $3400

2009-11-09T14:26:41-06:00

older roller 3.5 ft drums with 5000 lb tilt trailer. fresh tune up new starter works very good CALL BILL 8473438272

Drill Press-heavy duty indust,Dayton,1-1/2hp,p.f.spindle,new$3450,New! (Chicago) $1450

2009-11-09T13:23:05-06:00

Machine is brand new, never used, 20" swing Model 6w282, RPM-300-3000, Dayton brand, 110-220volts, Floor type. Heavy duty grade.

wood Lathe 12x36,varisp.brand new!Legs,New is $377, tooled (Chicago) $99

2009-11-09T13:08:20-06:00

Quality brand Palmgren. 84312 model, new price is $377 call BOB 847-791-3104

8 In Table Saw & Misc (Jefferson Park)

2009-11-09T12:21:39-06:00

Black & Decker 8in table saw $45 or offer call 1-773-794-0645
1 tool box & 1 tackle box $8 or offer
2 levels 3ft & 4ft $8 or offer
We also have others items for sale search using our phone number on homepage

13Hp Honda Engine---8000 Watt Generator---Like New Condition (South East Wi) $750

2009-11-09T12:09:55-06:00

For Sale: North Star Generator... 8000Watt.....13Hp Honda.....Like New Condition.....

Asking $750.oo Please call 262 818-8139

craigslist | tools in north chicagoland

ENGINE ANALYZER (WAUCONDA) $15

MILWAUKEE GRINDER/SANDER (WAUCONDA) $75

10in vertical bandsaw Craftsman New (north chicagoland) $99

4ton arbor press dayton New (chicago) $175

+++BLACK & DECKER MACHO III ROTARY HAMMER +++ (Glenview Northbrook 294 and Willow Rd.) $200

### GREENLEE HYDRAULIC PUMP 767 AND 1/2" TO 2" CUTTING DIES#### $475

@@@ GREENLEE METAL CUTTING DIES FOR HYDRAULIC PUMP 2-1/2" TO 4" (Glenview Northbrook 294 and Willow rd.) $300

***CRAFTSMAN SHOP VAC VACUUM*** (Glenview Northbrook) $75

%%% Bosch PS20 10.8 Volt Cordless Driver Drill Kit %%% (Glenview or Northbrook or Wheeling) $95

****IDEAL FISH TAPE 200' NEW IN BOX**** (GLENVIEW NORTHBROOK) $50

****LEATHER TOOL POUCHES LOT OF 4**** (GLENVIEW NORTHBROOK) $50

Acetylene/Oxygen torch (BrynMawr & Nagle (right off Kennedy 90 )) $90

welder (BrynMawr & Nagle (right off Kennedy 90 )) $70

Senco brad nailer set/kit - BRAND NEW (BrynMawr & Nagle (right off Kennedy 90 )) $90

Safety Speed Cut Panel Saw (Antioch, IL (lake county)) $600

Delta 10" Table Saw (Antioch, IL (Lake County)) $500

MINUTEMAN 20" 2-SPEED FLOOR MACHINE (gurnee) $200

Peerless Gas Furnace (Lakemoor, IL) $300

Yale Forklift Truck (Lakemoor, IL) $700

14 ft Workbench- Perfect for any Workshop (Waukegan) $350

@@@@ WORK TABLE ON WHEELS / ROLLING SHELF!!! (Glenview Northbrook near 294 and Willow ) $125

ENGINE stands, cranes, degreasers (Northside of Chicago)

HAND TRUCKS - 4 WHEEL (EVANSTON)

Cement Mixer Eelectric 110volts (NWS) $155

Fein multi master wanted

BANDSAW BLADES 14'9" X 1" X 6 TPI (WHEELING, ILLINOIS)

ABRASIVE BELTS 4" X 90" X 400 GRIT (WHEELING, ILLINOIS)

BANDSAW BLADES 64-1/2" X 1/2" X .025" X 14 TPI - RAKER (WHEELING, ILLINOIS)

BRAD POINT DRILLS FOR WOOD (WHEELING, ILLINOIS)

Matco Tool Box (McHenry) $850

52" Foot Shear

Tennsmith 8' Brake (Will Ship)

BANDSAW BLADES 15'- 4" X 1-1/4" (WHEELING)

Bandsaw Blades: 14'-10" x 3/4" x18/14 tpi (Wheeling, Illinois)

Bandsaw Blades 11'-11" x 1/4 x 14TPI (Wheeling, Illinois)

Bandsaw Blades 7' - 0" x 3/4" x 10 TPI (Wheeling, Illinois)

Lockformer (Free Shipping) $2195

BANDSAW BLADES 9'-0" X 1/2" X .025" X 4 TPI - HOOK (WHEELING, ILLINOIS)

Bandsaw Blades 10'-5" x 3/4 x 10 TPI (Wheeling, Illinois)

RAMS 20 Gauge Pittsburgh Machine (Kensoha) $3695

Pittsburgh Machine (Kenosha) $2195

Bandsaw Blade 13'0" x 1/2" x 18TPI (Wheeling, Illinois)

BANDSAW BLADE 5' - 6-1/2" (Wheeling, Illinois)

Abrasive Belt 3" x 132" x P240J (WHEELING, ILLINOIS)

MORRIS TOOLING SPINDLE EXTENSION 3533577/00/A (WHEELING, IL)

matco tool box (mchenry) $850

vehicle lettering, magnetics, decals

Belt&Disc sanders2'x6"x42"Crftsm!Brand new in box! (Chicago by fullerton and damen) $50

Delta 10" Contractor's Table Saw (Deerfield) $295

8in horzontal mitring saw Dayton New (North chicagoland) $850

FOR SALE PANEL SAW (DES LPAINES) $4700

MAKITA BOX, DRILL/IMPACT GUN SPOTS, 2-18V BATTERIES, W/DC18RA CHARGER! (WHEELING, IL. 60090) $200

Greenlee 882 (Skokie) $650

Brand New Scaffolding/Cross Braces/Plank (Tinley Park) $60

ARMSTRONG Extra Large 7 Combination Wrench 2"- 2 1/2" (Milwaukee) $150

ARMSTRONG 32 PIECE 3/4 IN DRIVE 12PT SOCKET SET W/CASE Exc. Condition (Milwaukee) $350

Woodworking Table and Lumber (Ashland & Lawrence) $200

Industrial Grade paint sprayer Honda motor $500 obo $500

1 1/2 hsp Tornado Floor Machine $600

Toe Kick saw (skokie il) $125

grinder , stihl saw,paslode framing gun,natural gas blower, kerosene b (north chicago)

KOBALT - TOOL BOX FOR PICKUP TRUCK BED (grayslake) $199

lincoln electric welder 3200 hd (north chicago) $400

Impact wrench (Lake Villa, Il.) $25

Dremel Tool (Lake Villa, Il.) $20

Dayton vertical Metal cutting band saw,mod 914,brand new! (chicago) $1650

Craftsman belt&disc Sander,2"x6'x42"Brand new in box! (chicago,damen &fullerton) $50

Heavy duty 6"bench Vises,brand new! (chicago) $100

Misc snap-on, matco, craftsman and boxes (Il/Wi border) $225

ROLLING LADDERS (EVANSTON LOCATION)

Slide Sledge slide hammers plus many tips $800 obo (Deerfield) $800

Snow Blower 139 CC (Waukegan) $200

CROWN MOULDING 6PC SET (IL) $75

Craftsman 13in wood planer New 2 1/2hp (north chicagoland) $199

***WEATHERGUARD KNAACK LADDER RACK FOR GM CHEVY BRAND NEW (Glenview Northbrook 294 and Willow Rd.) $299

SCMI I-320 (des plaines) $4700

Brand New Dewalt Nano 18 Volt Lithium Ion Batteries (pulaski and devon) $65

Cordless drill (park ridge) $35

Air Duct Cleaning Equipment (Gurnee Area) $3000

CRAFTSMAN SHOP VAC VACUUM (Glenview Northbrook) $75

IDEAL FISH TAPE 200' NEW IN BOX (GLENVIEW NORTHBROOK) $50

LEATHER TOOL POUCHES LOT OF 4 (GLENVIEW NORTHBROOK) $50

LEATHER TOOL POUCHES LOT OF 4 (GLENVIEW NORTHBROOK) $50

IDEAL FISH TAPE 200' NEW IN BOX (GLENVIEW NORTHBROOK) $60

CRAFTSMAN SHOP VAC VACUUM (Glenview Northbrook) $75

MOBILE WIRE CART CADDY ON WHEELS WITH #12 SOLID WIRE. (NORTHBROOK GLENVIEW*WILLOW RD. AND 294**) $125