favorite
favorite
hide
unhide
flag

Posted

print

PS Audio sprout 100 Integrated amplifier w DAC and phono - $550 (Nw Chicago)

PS Audio sprout 100 Integrated amplifier w DAC and phono 1 thumbnailPS Audio sprout 100 Integrated amplifier w DAC and phono 2 thumbnailPS Audio sprout 100 Integrated amplifier w DAC and phono 3 thumbnailPS Audio sprout 100 Integrated amplifier w DAC and phono 4 thumbnailPS Audio sprout 100 Integrated amplifier w DAC and phono 5 thumbnail
See pictures, description below, ships in original packaging.

Sprout is a simple, elegant source of music for those who want quality sound without the hassles that come with it. Sprout was designed by PS Audio's Scott McGowan as an answer to the complexity and cost of Audiophile systems. Appealing to the eye and ear, solid and reassuring to the touch, Sprout’s ease of use makes it appealing and accessible to music lovers around the world. It features a phono preamplifier for vinyl, a Bluetooth receiver for music streamed from smartphones, a high-quality hi-res DAC to handle anything stored on a computer, enough power for any speaker, and a headphone amp that drives even the toughest loads.

Specifications - Sprout100

Physical

Unit Weight 2.9 lbs [1.3 kg]
Unit Dimensions Width 6.2", Height 1.9", Depth 8.2" (chassis only, not including knobs) or 9.2” (including connectors and knobs)
Shipping Weight 5lbs [2.2 kg]
Shipping Dimensions Width 10.5", Height 5", Depth 14"
Power requirements

Voltage Options 100-240 VAC, 50-60Hz, Auto-Detect
Power Consumption 280W Maximum
Mains Power Input IEC C14
Phono Audio Input

Connector 1 Stereo Pair, Phono RCA
Cartridge type Moving Magnet
Cartridge Output 3mV-10mV (5mV recommended)
Cartridge Loading 47KΩ (100pF)
EQ Type RIAA
Gain +40dB
S/N ratio >84dB A-weighted (analog output)
Analog Audio Inputs

Connector 1 Stereo Pair, Line Level RCA
Maximum Input level 2.1VRMS (+6.44dBV)
Input impedance 10KΩ
Analog Audio Output

Connector 1 Stereo Pair, Line Level RCA
Output level, maximum 3.0VRMS (+9.5dBV)
Output Max Gain (using Analog Inputs) 8.45dB
S/N ratio >105dB (3VRMS ref)
THD (Analog) <0.01% (1VRMS, 1KHz)
S/PDIF Digital Input

Connector Optical (Toslink)
Format PCM (96KHz max), 24 bits
USB Input

Connector USB “B” Type
Format PCM (384KHz max), 24 bits, DSD64 (DoP), DSD128 (DoP)
Transfer mode Asynchronous
Bluetooth

Antenna Built in
DAC Uses Sprout's built in asynchronous DAC over S/PDIF (ESS Sabre 9016 DAC)
Stereo Power Amplifier Output

8Ω loudspeakers connected 50 watts per channel, both channels driven
4Ω loudspeakers connected 100 watts per channel, both channels driven
THD (Speaker Output) <0.01% (1W, 1KHz into 4Ω)
Frequency Response +/- 1dB (1VRMS out, 20Hz – 20Khz into 4-8Ω)
Signal to Noise >100dB at max power into 4Ω
Headphone Output

32Ω headphones connected 500mW
300Ω headphones connected 125mW
THD <0.01% (1KHz, 50mW into 32 Ω)
Signal to Noise >105dB at max power into 300Ω

Audiophile High End Acoustic Accuphase Adcom ADS Altec ATC Audio Note Audio Physic Audio Acoustic Research AR Arcam Audioquest Avalon Bel Canto Benchmark Benz Beveridge Boston Bozak Boulder Bowers Bryston B&W Cable Cambridge Celestion Chord Coincident Creek Dali Decware Denon Definitive Dynaco Dynaudio Dynavector Elite Energy Epos ESS Exposure Esoteric Gallo Garrard Goldring Grado Harbeth Harmon Kardon JBL Kef Koetsu Kimber Klipsch Krell Infinity Lexicon Linn Legacy Levinson Lowther Magico Magneplanar Magnepan Marantz Martin Logan Mcintosh Meridian Micro Seiki Mirage Mission Monitor Monster Music Hall NAD Naim Nakamichi NHT Nottingham Threshold Nordost Ohm Onix Oracle Paradigm Phono Pioneer Polk Pro-ject Proac Quad Rawson Rega Rel Revel Revox Rogers Rotel SACD Sansui Scott Shure Sony Speakers Audio SME Sonus Faber Spendor Tannoy Thiel Thorens Tyler Usher Vandersteen Vienna Acoustic Von Schweikert Velodyne VPI VTL Wadia Wilson Wireworld

post id: 7742567579

posted:

updated:

best of [?]

loading
reading
writing
saving
searching