loading
reading
writing
saving
searching
Hedgehog 4x Console - $4,500 (Old Town)
condition:
good
make / manufacturer:
ETC Lighting
model name / number:
Hedgehog 4x
size / dimensions:
21.9" / 20.8" / 4"
QR Code Link to This Post
This console is in good condition. Everything has been tested and is working. There is a small section that has some board tape gunk I was unable to clean off just to the left of the console screen. Console hasn't toured, only light professional use in a music venue. Comes with 2023 Capture Solo license which will need to be transferred upon purchase and is subject to how long it will take Capture customer service to complete the transfer.
Console Description:
HedgeHog 4X consoles might be small but they pack a serious punch! Built for travel, these consoles are compact and lightweight – perfect for new users and smaller venues. School theatres, nightclubs, corporate events, medium-scale rental events and houses of worship are the HedgeHog 4X’s natural habitats. These consoles share the same programming layout and capability as their larger brothers, and happily load show files from any console in the range.
The HedgeHog 4X sports an internal 12.1” multi-touch monitor, ten faders, and four encoder wheels. The desk has full networking capabilities and 6 Universe output, and supports two external DP monitors.
With six universes of onboard processing, two local DMX outputs (expandable with Widgets or Gateways), two external touchscreen connections, USB and HogNet / FixtureNet ports, just plug in and start working. Need SMPTE or MIDI? There’s a Widget for that, too.
Product Features
Robust Hog 4 OS operating system
Hog-Net connector
Fixture-Net connector
Unlimited simultaneous crossfades
Internal solid-state hard drive
One internal 12-inch 10-point touchscreen
Two external display port monitors/touchscreens supported
10 manual playback faders
Four expanded-wheelset encoders
12 user-assignable function keys
Kensington security slot
One dimmable white desk light included
Two USB flash drives for show storage and console recovery included
Dust cover included
Custom road case available
Compliance: ETL, CETL, CE
Capture Lighting Design Software, Solo
Connectivity
Local output processing: 3,072 output channels, expandable with DMX processors (HPU or DP8K)
Local DMX-512 outputs: 2x Neutrik 5-pin XLR
MIDI in/out/thru supporting MIDI messages, MIDI Show Control, and MIDI Time Code
Connectivity with visualizers via Fixture-Net (Art-Net or E1.31/sACN, unrestricted by local output capacity)
Supports USB playback and expansion Wings
USB 2.0 ports: 4 rear
USB 3.0 port: 4 rear
Electrical
Mains power: 100-250VAC, 50/60Hz, max 55W
Mains connector: IEC320 C13
Fuse: 1x 5x20mm 5AT fuse
Weights and Dimensions
Width: 527mm / 20.8"
Depth: 555mm / 21.9"
Height: 101mm / 4.0"
Weight: 7.7kg / 17lb