Features
● 120V 15A Automatic Transfer Switch (ATS) / Switched PDU (Agency de-rated to 12A continuous)
● Provides a redundant A/B power option for non-redundant networking equipment with a single inputpower cord
● Switched rack PDU (rPDU) features enable programmable or real-time power control of individual outlets via built-in network interface
● Digital display continuously reports total output power consumption in amps
● 8 switched NEMA 5-15R outlets
● 1U horizontal rack-mount form factor; 14.5 in. / 36.8 cm depth
● Set of two 12 ft. / 3.6m NEMA 5-15P input cables support connection to separate PRIMARY and
● Single-phase 12A 120V Auto
● Transfer Switch / ATS PDU
● Pre-installed WEBCARDLX with latest version of PADM20 for IPbased Auto Probe feature
● Enables redundant A/B power option for single-corded network devices
● Separate primary and secondary inputs connect to any two compatible power sources
● 1U horizontal rackmount; 2 NEMA 5-15P inputs; 8 NEMA 5- 15R outlets
● Individually switched outlets; Two digit visual current meter
SECONDARY power sources
● TS circuits normally maintain output sourced from the primary input cable; As primary input power fails or becomes unstable, the ATS will switch to maintain output sourced from the secondary input cable until power on the primary input is restored and stable
● ATS configurations enable fault-tolerant, hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system (in a twoUPS environment, the primary input cable must be supported by an online UPS with zero transfer time similar to SmartOnline series)
● Advanced ATS configurations utilizing separate mains circuits, backup generators and even separate out of phase utility power grid feeds are fully supported
● On-board ATS processor constantly evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source
● Super-fast switchover between primary and secondary power sources occurs in 2-7 milliseconds Pre-installed WEBCARDLX with the latest version of PowerAlert Device Manager firmware (PADM20) provides enhanced remote management capabilities
● PADM20 and PowerAlert Element Manager (PAEM) form a powerful tool for expanding maintenance
functions in large installations, including firmware update checks and backup and restoration of device
configurations
● IP-based Auto Probe detects lost connectivity and restores service autonomously Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities
● Outlets are factory programmed for sequential turn-on at 250 millisecond intervals as the PDU is first energized
● Front panel LEDs confirm power availability on both input lines
Package Includes:
ATS / Switched PDU with attached 5-15P input power cord