loading
reading
writing
saving
searching
Sump Pump 1/3 HP NEW in Box - $95 (Burr Ridge)
91st Street near Route 83 Kingery Hwy
QR Code Link to This Post
The Everbilt 1/3 HP submersible sump pump is built with an aluminum motor housing for efficient motor cooling. The pump is available with a tethered float switch requiring an 18 in. minimum diameter wide sump basin. The motor is built with thermal overload protection.
This is the same one sold at Home Depot for $120 plus Tax =$130!! Save $35
1-1/2 in. FNPT discharge
Semi-open thermoplastic impeller passes 3/8 in. solids
Submersible for quiet operation
Continuous duty, efficient 115-Volt PSC motor for lower carbon footprint, higher efficiency using less energy to operate
Aluminum motor housing for efficient motor cooling
8.25 ft. cord length
Pumps up to 2200 GPH at 10 ft., outperforms the competition
Product Weight (lb.): 8.49 lb
Maximum Working Temperature (F): 100
Discharge Flow @ 0 ft. (gallons/hour): 2600
Cord Length (ft.): 8.25
Impeller Material: Plastic
Pump Switch Type: Tethered
Discharge Flow @ 10 ft. (gallons/hour): 2200
Features: Bottom/End Suction,Non-Clogging,Self-Priming,Solids Handling,Submersible,Thermal Overload Protection
Maximum Horsepower (hp): .33
Minimum working temperature (F): 35
Power Type Required: AC
Housing Material: Aluminum
Amperage (amps): 5.5 A
Voltage: 115v
Discharge Flow @ 15 ft. (gallons/hour): 1950
Sump Pump Outlet Diameter Type: 1-1/2 FPT
Certifications and Listings: CSA Certified
Product Depth (in.): 6.3 in
Switch-On Height (in.): 11.81
Product Height (in.): 10.63 in
Switch-Off Height (in.): 3.94
Maximum Pumping Height (ft.): 19
Product Width (in.): 8.27 in