loading
reading
writing
saving
searching
Professional grade EPOXY Floor kit 2 car garage SIMIRON FEATHER GRAY - $750 (Worth, IL)
QR Code Link to This Post
You get
ONE - 1150FC (3 gallon kit) Clear color
TWO 16OZ cans of UTINT LIGHT GRAY COLOR
TWO Boxes of the flake FEATHER GRAY blend color
TWO boxes of the POLYASPARTIC HS TOP COAT (two boxes is a total of 4 gallons)
The kit retails for $1120.86 I am selling it for $750
To install this, you need to prep your floor by grinding the concrete. Once the floor is prepped, you then apply the base 1150FC and then spread the flake blend. Once the flake is dry, you then scrape off the excess and then apply the top coat. Dries pretty fast but best to let it cure for 5 days before driving a car on it. Many youtube videos on this.
SPECS
Physical and chemical properties
Type: 100% solids, two-component, fast-cure epoxy floor coating
Mix Ratio: 2 Parts Base to 1 Part Activator by volume
VOC: Zero
Tensile Strength: 9,200 psi (ASTM D638)
Compressive Strength: 10,600 psi (ASTM D695)
Flexural Strength: 9,600 psi (ASTM D790)
Hardness: Shore D 75 (ASTM D2240)
Abrasion Resistance: 50 mg loss (50 mg loss at 1000 g load, 1000 cycles, CS17 wheel)
Adhesion: > 400 psi (100% Concrete Failure) (ASTM 7234)
Elongation: 5–10%
Gloss: 96° (96 gloss units
Performance and application
Application Temperature: As low as 32F / 0C
Moisture Vapor Tolerance: Controls up to 12 lbs. MVT (per ASTM F1869) when applied at 16 mils total thickness
Coverage: Varies based on application thickness, but approximately 100-533 Sq. Ft. per gallon
Key Features: Impact resistant, chemical resistant, solvent-free, and provides excellent adhesion
Application method: Applied with a squeegee and roller to a thin coat with no backrolling to minimize bubbles
Important considerations
Pot life is approximately 10–15 minutes after mixing; do not mix more than can be applied in this time
If the recoat window is missed, the surface must be sanded to prepare for the next coat
Can be pigmented with Simiron E-Tints in various colors