I have here a Telecaster Partscaster I bought a while ago and am looking to let it go.
Scale length 25.5 and has 21 frets.
Neck is GLOSS and chunky ( 0.85 first fret, 0.97 at 12th fret)
Nut is 1.650
I would guess the weight is between 7.5-8lbs.
Switching Positions as Follows:
1. Bridge
2. Bridge in parallel with Neck
3. Neck
4. Neck in series with Bridge
Alnico 5 Dual Rail Humbucker Bridge Pickup 12k
Alnico 5 Dual Rail Humbucker Neck Pickup 7.1k
500K Volume/Tone Potentiometer Audio Taper Both knobs push/pull. Volume knob is Push/Pull Coil split, tone knob is Push/Pull Series or Parallel.
.022uf Mallory 400v Tone Capacitor
Detailed Switching Positions as Follows:
1. Bridge (Resistance 12.0 ohms)
with (partial) coil split (tone knob only) 7.6 ohms
with (partial) coil split (tone & volume knob) 3.3 ohms
with (partial) coil split (volume knob only) 3.9 ohms
2. Bridge in parallel with Neck (regular Tele position) (Resistance 4.5 ohms)
with (partial) coil split (tone knob only) 3.7 ohms
with (partial) coil split (tone & volume knob) 3.0 ohms
with (partial) coil split (volume knob only) 3.5 ohms
3. Neck (Resistance 7.1 ohms)
with (partial) coil split (volume knob only) 4.9 ohms
4. Neck in series with Bridge (Resistance 18.7 ohms)
with (partial) coil split (tone knob only) 14.5 ohms
with (partial) coil split (tone & volume knob) 5.4 ohms
with (partial) coil split (volume knob only) 5.5 ohms