...
▲
favorite
favorite
hide
unhide
flag
flagged

Posted

Contact Information:

print

Welding and Fabrication Table - $2,000 (Carol Stream)

‹ image 1 of 24 ›
Welding and Fabrication Table 1
Welding and Fabrication Table 1 thumbnailWelding and Fabrication Table 2 thumbnailWelding and Fabrication Table 3 thumbnailWelding and Fabrication Table 4 thumbnailWelding and Fabrication Table 5 thumbnailWelding and Fabrication Table 6 thumbnailWelding and Fabrication Table 7 thumbnailWelding and Fabrication Table 8 thumbnailWelding and Fabrication Table 9 thumbnailWelding and Fabrication Table 10 thumbnailWelding and Fabrication Table 11 thumbnailWelding and Fabrication Table 12 thumbnailWelding and Fabrication Table 13 thumbnailWelding and Fabrication Table 14 thumbnailWelding and Fabrication Table 15 thumbnailWelding and Fabrication Table 16 thumbnailWelding and Fabrication Table 17 thumbnailWelding and Fabrication Table 18 thumbnailWelding and Fabrication Table 19 thumbnailWelding and Fabrication Table 20 thumbnailWelding and Fabrication Table 21 thumbnailWelding and Fabrication Table 22 thumbnailWelding and Fabrication Table 23 thumbnailWelding and Fabrication Table 24 thumbnail
condition: good
make / manufacturer: na
size / dimensions: 4'x8'x28"

QR Code Link to This Post

This table with change your life.

Welding and Fabrication table. $2000 OBO
Tabletop is 4' x 8' x 28" with 1.75" thick steel top. The legs and cross members are 4"x4" heavy steel tube. The grid on the tabletop is 10cm x 10cm and was etched into the table when I purchased it used a number of years ago. I have since added the 3/8"-16 tapped holes in the center of the grid. The tapped holes are minimum 3/4" deep. Two holes have broken taps in them. The table currently has wheels on it. However, the wheels are the bare minimum for a table of this weight (2,300 LB) . That being said the table does roll, allowing for the table to be winched onto a flatbed tow truck*. Which is how I have moved it in the past. I also have (5) of the original leveling pads and shafts. I believe the table was originally ground, but I cannot confirm.

Comes with leveling feet, vise, screw jacks with mounting plates.

Please contact me with any questions or if you would like to come check it out.

*I have a friend with a flatbed that can move the table for $350.00 in the Chicago land area.

post id: 7904605347

posted:

♥ best of [?]

loading
reading
writing
saving
searching

refresh the page.